Choosing solar energy to power your home is a great way to save money by investing in renewable energy. But the problem with a professional installation is that it can cost tens of thousands of dollars. Many DIY enthusiasts have decided to learn how to install solar panels by themselves. If you can put together a bookshelf from IKEA, you can install solar panels by yourself too.
Before You Install Solar Panels
Always put your safety first when installing solar panels, especially if you are mounting them onto a roof. Check regulations in your area before you buy solar panels as some local laws will have specific rules about the maximum size of the panels and where they can be positioned.
All electrical work has risks so make certain you understand what you are doing, what components you are working with, and what to do with them.
Lastly, be wary of purchasing solar panels online because unfortunately some manufacturers are only out to make a quick buck and will peddle unsafe and faulty panels. So always deal strictly with reputable dealers.
Solar Panel Installation Checklist
- Solar Panels
- Lag Bolts
- Solar Panel Conduit
- 3/8 Inch Steel Bolts
- Stud Finder
- Metal Rails
Before starting the installation process, you will need to figure out how much power you are currently using. This is important because this will determine how much solar power you will need to generate and how many panels you will need to fulfill the energy demands.
Find out how much room you have available to mount the solar panel as you may have limited space. You do not want to go out and purchase numerous panels only to find out that you don’t have enough room for all of them. Identify the optimum position for the solar panels where they will be exposed to the greatest amount of direct sunlight.
Using a stud finder, find out where the exact location of the rafters on the roof. These rafters will offer support for the panels when they are installed.
Select the right mounts for your type of roof and the solar panels you are installing. There are generally three mounts available: roof ground mounts, pole mounts, and flush mounts. Follow the guidelines from the manufacturer mount the panels. This should involve drilling and securing the mounts to the roof and then attaching them with lag bolts.
Next, attach the metal rails onto the mounts by using 3/8 inch stainless steel bolts.
Now it’s time to attach the solar panels to the metal rails. You want to get this step exact so that each panel is secured safely. Open the junction box which is located on the back of each individual solar panel and connect the panels together.
After you have connected the solar panels together, run the wire from the last panel to the junction box and attach the conduit to the converter. Before making the final connections inside your home, ground the system for safety purposes.
See, that wasn’t so hard was it? Learning how to install solar panels may seem a bit confusing at first. But when you download one of our recommended Solar Panel Guides, it will make it easy for you. Just follow the step-by-step instructions and start saving money on your electric bills!